Graphtec CE6000-60 Plus 24" Vinyl Cutter and Plotter with Stand
The Graphtec CE6000-60 Plus 24" Vinyl Cutter and Plotter is amongst the easiest to use on the market while yielding high
quality results every time. This cutting plotter is featured with 39 inches per second cutting speed,
a 4.41 Newton cutting force, and a 24" cutting width. The built-in front control panel provides complete
parameter control including eight preset cutting conditions, as well as advanced features like tangential
control mode, down force offset, pen up speed, blade wear monitoring and more. Managing your cutting
jobs is simpler than ever with its 25 pin RS-232C, High Speed USB 2.0 control interface, and a larger
LCD screen. The Graphtec CE6000-60 Plus 24" Vinyl Cutter and Plotter comes standard with floor stand,
Cutting Master Plug-in, and Graphtec's ARMS (Automatic Registration Mark Sensor) system. Also available
in other models with 15" (desktop) or 48" cutting widths.
3.7 inch wide user-friendly LCD control Panel:
Setting can be easily configured using the large LCD (3.7-inches, 240x128 dots) and tactile control
panel. It is also icon driven and supports 10 languages.
High adaptability to the operating environment:
The design of the media feed system ensures that loaded media is acclimated to the ambient temperature
and humidity before plotting or cutting. The user-selectable media pre-feed function
sets two outer tracks, enhancing media handling. Together, these two media feed elements
ensure reliable cutting and plotting quality within the desired operating environment.
Easy to use in simple operation mode:
Two set up menus: simple and normal are available an can be chosen by the operator as desired.
Media brake on the media stocker:
A brake system is incorporated to assist loading heavy rolls of media properly.
Dual tool configuration and easy switching between cutting and plotting:
The pen carriage holds both a plotting pen and a blade at the same time — to enable easy switching
between plotting and cutting operations. Four sets of user-specified setup parameters
are retained in memory for instantaneous recall. The pen is for plotting and detailing
graded patterns with seams, text, notches, Grain direction, etc.
Enhanced speed when cutting:
Innovative features include maximum cutting speeds of 39 ips and with a maximum cutting force of
450g. It also features an easy to use menu navigation system with eight groups
of preset conditions which facilitates instantaneous recall of pre-programmed
job-specific plotter setups. Tri-port connectivity (USB, parallel and serial)
makes the CE6000 Plus Series compatible with virtually any computer configuration.
Reliable long length tracking up to 196.85 inchs long:
The built-in front control panel provides complete parameter control including eight preset cutting
conditions, as well as advanced features like tangential control mode, down force offset,
pen up speed, blade wear monitoring and more. With a 25 pin RS-232C or the High Speed
USB 2.0 control interface, the CE6000 Plus Series is compatible with legacy computer systems
as well as the latest PCs available now and for several years to come.
ARMS 5.0 for high precision cutting in the print and cut application:
ARMS is an abbreviation for Advanced Registration Mark Sensing system, which uses sensors to detect
registration marks and performs the AXIS ALIGNMENT.